Competitive price insert bearing SB
Introduction
The inner ring and the shaft are fixed tightly by two setting screws in the bearing with wire jacking. Under the working condition with vibration and impact, under the working condition with frequent repeated starting, and under the working condition with large load or high speed, the fixing effect of the fixing screw can be greatly increased by processing the fixing groove or pit at the corresponding position of wire jacking on the shaft.
Application
It is suitable for the application with the change of rotation direction.
Parameters
| Bearing | Shaft Dia. | Dimensions(in.)or (mm) | Basic Dynamic Load Rating |
Basic Staic Load Rating |
Weight | |||||||||||||||||||
| d | ||||||||||||||||||||||||
| NO. | (in.) | (mm) | Be | D | Bi | n | m | G | h | ds | (kg) | (kg) | (kg) | |||||||||||
| SB | 201 | 12 | 0.4724 | 1.5748 | 0.8661 | 0.2362 | 0.6299 | 0.1772 | 0.1417 | 10-32UNF | 760 | 450 | 0.10 | |||||||||||
| 201-8 | 1/2 | 12 | 40 | 22 | 6.0 | 16.0 | 4.5 | 3.6 | M5X0.8 | |||||||||||||||
| SB | 202 | 15 | 0.4724 | 1.5748 | 0.8661 | 0.2362 | 0.6299 | 0.1772 | 0.1417 | 10-32UNF | 760 | 450 | 0.10 | |||||||||||
| 202-10 | 5/8 | 12 | 40 | 22 | 6.0 | 16.0 | 4.5 | 3.6 | M5X0.8 | |||||||||||||||
| SB | 203 | 17 | 0.4724 | 1.5748 | 0.8661 | 0.2362 | 0.6299 | 0.1772 | 0.1417 | 10-32UNF | 760 | 450 | 0.10 | |||||||||||
| 203-11 | 11/16 | 12 | 40 | 22 | 6.0 | 16.0 | 4.5 | 3.6 | M5X0.8 | |||||||||||||||
| SB | 204-12 | 3/4 | 0.5512 | 1.8504 | 0.964 | 0.2756 | 0.7087 | 0.1772 | 0.1535 | 1/4-28UNF | 1000 | 630 | 0.12 | |||||||||||
| 204 | 20 | 14 | 47 | 25 | 7.0 | 18.0 | 4.5 | 3.9 | M6X1.0 | |||||||||||||||
| SB | 205-14 | 7/8 | 0.5906 | 2.0472 | 1.0630 | 0.2953 | 0.7677 | 0.2165 | 0.1535 | 1/4-28UNF | ||||||||||||||
| 205 | 1 | 15 | 52 | 27 | 7.5 | 19.5 | 5.5 | 3.9 | M6X1.0 | 1100 | 710 | 0.16 | ||||||||||||
| 205-16 | 25 | |||||||||||||||||||||||
| SB | 206-18 | 1 | 1/8 | |||||||||||||||||||||
| 206 | 1 | 3/16 | 0.6299 | 2.4409 | 1.1811 | 0.3150 | 0.8661 | 0.2165 | 0.1969 | 1/4-28UNF | 1520 | 1020 | 0.24 | |||||||||||
| 206-19 | 1 | 1/4 | 16 | 62 | 30 | 8.0 | 22.0 | 5.5 | 5.0 | M6X1.0 | ||||||||||||||
| 206-20 | 30 | |||||||||||||||||||||||
| SB | 207-20 | 1 | 1/4 | |||||||||||||||||||||
| 207-22 | 1 | 3/8 | 0.6693 | 2.8346 | 1.2598 | 0.3346 | 0.9252 | 0.2599 | 0.2165 | 5/16-24UNF | 2010 | 1390 | 0.42 | |||||||||||
| 207 | 1 | 7/16 | 17 | 72 | 32 | 8.5 | 23.5 | 6.5 | 5.5 | M8X1.0 | ||||||||||||||
| 207-23 | 35 | |||||||||||||||||||||||
| SB | 208-24 | 1 | 1/2 | 0.7087 | 3.1496 | 1.3386 | 0.3543 | 0.9843 | 0.2756 | 0.2362 | 5/16-24UNF | 2560 | 1810 | 0.6 | ||||||||||
| 208 | 40 | 18 | 80 | 34 | 9.0 | 25.0 | 7.0 | 6.0 | M8X1.0 | |||||||||||||||
| SB | 209-26 | 1 | 5/8 | |||||||||||||||||||||
| 209-27 | 1 | 11/16 | 0.748 | 3.3465 | 1.6220 | 0.3740 | 0.9843 | 0.3228 | 0.2480 | 5/16-24UNF | 3260 | 2450 | 0.8 | |||||||||||
| 209 | 1 | 3/4 | 19 | 85 | 41.2 | 9.5 | 25.0 | 8.2 | 6.3 | M8X1.0 | ||||||||||||||
| 209-28 | 45 | |||||||||||||||||||||||
| SB | 210-30 | 50 | ||||||||||||||||||||||
| 210-31 | 1 | 7/8 | 0.748 | 3.5433 | 1.6378 | 0.3937 | 1.2441 | 0.3622 | 0.2559 | 5/16-24UNF | 3580 | 2300 | 0.83 | |||||||||||
| 210 | 1 | 13/16 | 20 | 90 | 41.6 | 10.0 | 31.6 | 9.2 | 6.5 | M8X1.0 | ||||||||||||||
| 210-32 | 2 | |||||||||||||||||||||||
| SB | 211-32 | 55 | ||||||||||||||||||||||
| 211-34 | 0.9055 | 3.9370 | 1.7835 | 0.4646 | 0.9843 | 0.3858 | 0.2835 | 5/16-24UNF | 4400 | 2960 | 1.1 | |||||||||||||
| 211 | 2 | 1/8 | 21 | 100 | 45.3 | 11.8 | 25.0 | 9.8 | 7.2 | M8X1.0 | ||||||||||||||
| 211-35 | 2 | 3/16 | ||||||||||||||||||||||
| SB | 212 | 60 | 0.9449 | 4.3310 | 2.1142 | 0.5866 | 0.9843 | 0.3858 | 0.3150 | 3/8-24UNF | 4850 | 3300 | 1.3 | |||||||||||
| 212-36 | 2 | 1/4 | 24 | 110 | 53.7 | 14.9 | 25.0 | 9.8 | 8 | M10X1.0 | ||||||||||||||
